Precision distribution monitoring solution for IDC
It is necessary to real-time monitor and centralize power consumption in data center and data can be displayed on HMI,and uploaded to the power and environment monitoring system by RS485 on touch screen and realize real-time monitoring of whole power distribution system. At the same time, it can realize energy efficiency analysis to reduce energy consumption.
1.Incoming line and outgoing line circuits independent monitoring modules
2.Can measure up to 2 incoming line circuits and up to 192 outgoing line circuits current,voltage,power,energy and power quality.
3.Data centralized monitoring and display by HMI and data is uploaded to power and environment monitoring system through RS485.
4.For high voltage DC 240V or 336V system,insulation monitoring module can be added to monitor ground insulation resistance of main bus.
5.DC24V power supply for touch screen and outgoing line monitoring module(power supply from main module output )
6.Communication:monitoring device by RS485,touch screen by RS485 or RJ45
7.Certificate:CE
| Name | Pic | Model | Main Function |
| HMI
|
 |
ATP007ktATP010kt | 1.7 or 10 inch touch screen2.Real-time monitoring and display voltage,current,power,energy,power quality,switch status,waveform curve and so on.
3.monitoring device alarm,communication and other parameters can be configured on the screen. 4. 2 RS485 and 1 Ethernet interface,and data can be uploaded by RS485 or RJ45. |
| AC incoming line monitoring module |  |
AMC16Z-ZA | 1.Installation:DIN rail 35mm2.Measurement:A+B independent 3 phase circuits, 6DI2DO,2 leakage current,1 temp. and humidity.
3.With DC 24V output power supply for outgoing line module and touch screen. 4.Communication:RS485 Modbus RTU |
| AC outgoing line monitoring module |  |
AMC16Z-FAK24AMC16Z-FAK48 | 1.Installation:DIN rail 35mm2.Can measure up to 16 circuit 3 phase or 48 circuit single phase
3.DC24V power supply 4.Communication:RS485 modbus RTU |
| AC outgoing line current transformer |  |
AKH-0.66W | Current ratio：100A/50mACommon Specification: 100A/50mA |
| DC incoming line monitoring module |  |
AMC16Z-ZD | 1.Installation:DIN Rail 35mm2.Measurement:A+B independent circuits,6DI2DO,1 temp. And humidity.
3.With DC 24V output power supply for outgoing line module and touch screen. 4.Communication:RS485 modbus RTU |
| DC outgoing line monitoring module |  |
AMC16Z-FDK24AMC16Z-FDK48 | 1.Installation:DIN Rail 35mm2.Can measure up to 48 circuits DC outgoing line
3.DC24V power supply 4.Communication:RS485 modbus RTU |
| DC incoming line insulation monitoring module |  |
AMC16Z-ZJY | 1.Installation:DIN Rail 35mm2.Measure A+B independent DC circuit ground insulation resistance of main bus
3.DC24V power supply 4.Communication:RS485 modbus RTU |
| DC outgoing line insulation monitoring module |  |
AMC16Z-FJY | 1.Installation:DIN Rail 35mm2.Measure 24 circuits ground insulation resistance of DC outgoing line |
| DC outgoing line hall effect current sensor |  |
AHKC-BS | Current ratio：100A/5VCommon Specification: 100A/5V |
